Green Earth has become a more professional and full-fledged company since a decade development.

yinpei@green-earth.cn   +86 13823531612

Why Is Article 370 Bad for India?

Article 370 and 35(a) was a blot and burden on the Govt. of India, which has now been abrogated, though very late. But let us say, Better late than never. So, it is now amply clear that, when Pakistan is furious due to abrogation of Article 370, then it is automatically cleat it is beneficial for India. Pakistan and Kashmiri terrorists were taking full advantage of this Article 370, and now, when it is abrogated, many channels of undue help have also closed for Pakistan and Kashmiri terrorists

• Suggested Reading

Did Greta Van Fleet start as a Led Zeppelin tribute band?

Of course theres this video from a couple years ago:Does that answer your question?They would be 100% less insufferable if they werent so adamant about their denials of influence and even basically indignant that anyone would even make the comparison."You know, they were one of the greatest bands in the history of rock music, and while we're absolutely unworthy of any comparison, I'm just thrilled and honored to be mentioned in the same paragraph let alone same sentence as them."HOW HARD WAS THAT

------

Is it true that Trump is trying to make the pandemic worse so that Biden won't want to deal with it?

I think fake news is making the pandemic worse by inflating numbers to make Trumpu2019s administration look inept. It could have been much worse if President Trump didnu2019t stem the tide of illegal immigration as he always done during his term. Of course no one ever points out that fact. Biden to date doesnu2019t even want to debate President Trump, if he canu2019t take on the man how is he to take on a global issue that needs guts to face it?

Why Is Article 370 Bad for India? 1

------

Is it true that by the age of 16 you will have already met your future spouse?

It is probably true for someone on this planet. I have never met or heard of anyone doing this. What makes you think it is true? Because someone said it to you? Do you believe everything you hear?It is good that you are questioning this. Questioning things is better than blind acceptance. It is good to use your intelligence for some critical thinking when people say something that doesnt sound true or make sense. Same thing when you read something that doesnt make sense or sound true.

------

What was the factor for European exploration?

In the case of the Portuguese trail blazers there are 3 main factors:1-Geographicaly cornered by Spain, access to Europe and the mediterranean blocked, few internal ressources, just a big green sea ahead2-The Crusades. Delivering Jerusalm (and curiously, later Etyopia) was an obsession. The sea expansion was a (chrono)logical following to the Reconquista. Reaching India would after all disrupt the muslim trade (indeed the Mamluk Empire colapsed). Also a milenarist view of the world comes into play (2nd coming of Christ, etc).3-Business as usual

------

What are the best and worst things about India or Indians?

Best thing- Our culture and diversity. No other country has so many languages spoken in such large numbers. No other country has so many people practicing so many faiths. We're diverse, yet unitedWorst thing-there's no value for human life in India. Recently, a man was accidentally killed by a tiger in a Delhi zoo. Where were the security guards? And innocent college kids were washed away because the dam authorities in himachal couldn't warn people before opening the gates. Many such events have taken place, which could have been avoided.

------

Why was Jawaharlal Nehru selected as the first Prime Minister of India instead of Sardar Vallabhbhai Patel?

Had he not been accepted Nehru threatened to see India fragmented as was existing before British empire. On the other hand Gandhi was monarch like dictator in Congress thrusting his opinions irrespective of the result of the decision .Motilal father of Nehru ,who had foresight , purchased congress indirectly through Gandhi, as Gandhi was regarded instrumental in moulding decisions either by his nonviolence or by fasts. British was also sympathetic towards Nehru because of his links with Mrs Mountbaton ,to whom Nehru succumbed in mortgaging interests of independent India

Why Is Article 370 Bad for India? 2

------

What exactly were the Godhra Muslim-Hindu riots?

In 1984 RSS and hypocrites were involved in high proportion to kill the SikhsEven a kid in Gujarat knows insecure modi orchestrated the godhra riotsEverything was an inside job for electionsMain accused for train burning was not convicted and wasn't found guiltyThese sanghis are difficult to understand Mohan bhagwat sometimes preaches about tolerance and ahimsaAnd on the other hand the sanghis are completely oppositePm modi can't answer any questions on godhra because it continues to haunt him againI can assure you leaders like Jinnah,modi who are mass murderer will be burnt and churned in hell fire forever

------

When the impeachment trial finally goes to the Republican-controlled Senate, will they ask the same witnesses to return or will they ignore those who are likely to provide key testimony?

How can feelings and opinions be key testimony? The Senate will approach this in the correct way and hear real evidence not opinions and assumptions. The fact that democrats used opinion to put on a scripted show says they never had more than an idea to remove the president. The result of their theatre was the opposite of what they wanted. Instead of convincing the public to impeach they showed how desperate they really are,and they're really desperate. The complete lack of a real candidate is their real problem and that's the real reason for their coup attempt

------

What is the best way to learn how to properly pronounce a word?

The best to way to pronounce a word is by listening it in the accent that you can easily understand. For instance, if Sorry is said by a native of any other country (lets say Australia) it can be bit of a roller coaster ride, as Me, being an Indian it would be bit tough to get what the person said.,but if the same word is said by any Indian we would be able to get it real soon. Hope Ive made my point clear! :).

------

Will Islam rule the world?

According to pew research centre , Islam will take over Christianity by 2070That means in 2100 it will constitute 50-60% of the worlds population . Islams followers are the most serious. They are ready to die for Islam unlike all other religions.This means a time will come when there would be no other choice for the world than to bow before muslims. Moreover islam will spread in europe,america,india and many other countries. Therefore, non muslim countries will have to respect this .Muslims may become united in the future

------

What is the Aryan race?

Aryans were a collection of tribes in Russian steppes who formed settlements around 4000BC. By 3000BC they had formed a civilization specializing in:Strong emphasis on fire worshipHorse sacrificeCentral role of kings followed by priestly classBy 2500 BC they started expanding across Europe and around 2000BC across Asia. In Europe Aryans decimated the celtic population in much of eastern Europe. In Iran they overtook the elamite civilization, forming the religion of zoroasterism. In India however they could not completely win over the country but formed an alliance with Indian priestly elite to give birth to religion of Hinduism

------

Will the Fortnite game ever die?

Hopefully not. However, I can totally imagine going to school after summer break and to return to nobody talking about Fortnite like they did in the previous school year.Also, it will only die when everyone believes that its dead. The thought of Fortnite dying is like a disease if you believe it, others will too. If you want to keep it alive for as long as possible, make sure you introduce others about Fortnite, and make sure you try not to tell others that Fortnite is dead

------

What if Jews never went to present-day Israel and stayed in Europe after WW2?

If all the European Jews who survived the Holocaust had stayed in Europe:A) The 600,000 Jews of the Palestinian Mandate would have declared independence and won the war in 1948. Just exactly like what actually occurred.B) The 800,000 Mizrahi Jews from Arab lands would have immigrated to Israel and been welcomed to Israeli society. Just exactly like what actually occurred.C) The Jews who stayed in Europe would have experienced more of the same: Antisemitic hostility, Boycotts, and Violence.Eventually, they would all have come to Israel, like the 1,200,000 Soviet Jews did in the 90s, and like the French Jews are currently doing.

------

Why are Tamils called Dravidians? Although no Tamil literature states Tamil people as Dravidian.

Because of the Tamil nadu Dravidian politics and British propaganda.Dravida is a Sanskrit word denoting the geographical area of South India. Dravida means in Tamil Thennadu. Also thennadu depicts the area below Himalayas.

Dravidian is the word which was evolved and propagated during the British period in 1850s. Dravidian word evolution Even, the word Dravida which depicts all the southern states of India, no other states given a damn about this British propagated word. Tamilnadu political parties picked this British scattered word and evolved themselves.

Moreover, British created several myths including the Aryan-Dravidian myth to detach India. Adis

------

What is it like being a married couple that still lives in the familyu2019s house with their nuclear family? Does the environment make copulation impossible?

If that is a couples primary worry, Id suggest reading very carefully all the answers you may receive here. The biggest worry is that this couple does NOT have its own household as a married couple. They are not adults. They are still somewhat children in someone elses householdthey dont make the rules, the schedule or the traditionseven toxic.

So if opportunity to copulate is a persons primary worry or thought, then that person may not be ready to be a married person. Just sayin

------

Why there is no Tamil born actress in Tamil Cinema? Is it so difficult to get few talented women out of 7 crore population?

Tamil born actresses like Vaijayanthi Mala, Sridevi, Vidhya Balan ruled Bollywood.So before asking the question Why there is no please check who are there. Let me show you the recent Tamil born actress in Tamil movies.

Remember all of the below mentioned actresses are extremely talented!SamanthaSai PallaviMegha AkashAndreaVaralakshmiShruthi HassanRegina CassandraDhansikaAishwarya RajeshPriya AnandJanani IyerAbove all, the most successful actress in Kollywood today is Keerthy Suresh, who is also a Chennai born girl. And Trisha who ruled Kollywood for 12 years and Tollywood for at least few years is also from Chennai!

------

Who was the greatest Indonesian hero?

I think every hero, in Indonesia or any other part of the world, have their own contribution to their country hence all heroes are great in their own way.My personal favorite is General Soedirman.He leads the guerilla warfare during the second Dutch aggression in 1948. He leads the army for 7 months while he is suffer from TBC. At first, he have difficulties to walk and after some time, he is carried in a stretcher.While other leader just sit in their desk and let their troops in the battle, he refuse to do so and lead the battle anyway. What a guy.

------

What is maximum current for 16mm cable?

It all depends on how hot you will allow the conductor to be.Once you answer that, then the answer depends on which conductor alloy you want to use, whether or not the conductor is insulated and whether or not it is cooled.Some conductors hang in the air between poles, they are air cooled. Even more so when the wind is blowing.

Some conductors are tubes with cooling water pumped through them.Some are insulated with PVC, stuffed with a bunch of other wires inside conduits that are run across roofs in hot sunny areas.So, not a simple answer, is it?

------

In Mahabharat, if Vidhur knew about the house of wax plan to kill Pandavas, why did he not order a formal investigation or start a trial against Shakuni?

Vidhur is just a minister. He cannot order investigation in his own. Only the King Dridarashtra can order for the the same. Since prince duryodhana is involved in this, he would not allow any such investigation. But the main point why vidhur did not do any against the incident was, he very well knew that Pandavas escaped and were alive which no one knew in the ministry except bheesma. If any such investigation took place, it might come to light that Pandavas were escaped which again will put their life in danger

------

What are the most over-rated songs of all time?

"Smells Like Teen Spirit" by NirvanaThere, I said it!!!Also, one of the most overrated bands of all time, guitarists of all time, icons of all time, and overrated overrated entities of all time.Enough with the Nirvana already.Don't get me wrong, it's a good song, but it has been credited with single-handedly starting an entire revolution that was already well underway.

Other grunge bands were signed to major labels before Nirvana and, as is usually the case, the first notable song of a genre will invariably become overrated.Saying Nirvana created grunge is like saying Columbus discovered America.

HOT PRODUCTS
no data
no data
GET IN TOUCH WITH US
no data
recommended articles
News Projects
End of Halogen Light Bulbs Spells Brighter and Cleaner Future
End of Halogen Light Bulbs Spells Brighter and Cleaner Future
Halogen light bulbs will be banned from September 2021 with fluorescent light bulbs to follow, cutting emissions and saving consumers on their energy bills. ●Halogen light bulbs to be banned from this September – with fluorescent light bulbs to follow suit ●shift to LED bulbs will cut 1.26 million tonnes of CO2 – the equivalent of removing over half a million cars from UK roads ●new rules part of tighter energy efficiency standards for electrical appliances as the UK builds back greener, helping save British consumers £75 a year on their energy bills The government has announced plans today (Wednesday 9 June) to end the sale of halogen light bulbs from this September, as part of the UK’s wider efforts to tackle climate change. Legislation being brought forward this month will also include the removal of fluorescent lights from shelves from September 2023. Currently, around 2 thirds of bulbs sold in Britain are LED lights, making a considerable impact in improving the energy efficiency of the country’s buildings. They last 5 times longer than traditional halogen lightbulbs and produce the same amount of light – but use up to 80% less power. The UK began phasing out the sale of higher-energy halogen lightbulbs in 2018. The new legislation would mean retailers will no longer be able to sell the majority of halogen bulbs for general household use in the UK from 1 September. To help people make the switch, ministers are also announcing that all light bulbs will start to feature new energy efficiency advice via ‘rescaled’ energy labels on their boxes. The labels will simplify the way energy efficiency is displayed on a new scale from A-G, doing away with the A+, A++ or A+++ ratings. The new labels will raise the bar for each class, meaning very few bulbs will now be classified as A, helping consumers choose the most environmentally friendly bulbs. This measure is expected to mean that LED light bulbs will account for 85% of all bulbs sold by 2030. In addition, the government also plans to start phasing out the sale of high-energy fluorescent lightbulbs, with a view to bringing an end to their sale from September 2023. Taken together, these new rules will mark a significant shift to more energy efficient and longer lasting LEDs and will stop 1.26 million tonnes of carbon being emitted every year - the equivalent of removing over half a million cars from the UK’s roads. The move is part of a package of energy efficiency improvements to electrical appliances, which will save consumers an average of £75 a year on energy bills. Energy Minister, Anne-Marie Trevelyan, said: We’re phasing out old inefficient halogen bulbs for good, so we can move more quickly to longer lasting LED bulbs, meaning less waste and a brighter and cleaner future for the UK. By helping ensure electrical appliances use less energy but perform just as well, we’re saving households money on their bills and helping tackle climate change. Today’s plans also include a ban from September on the sale of lighting fixtures with fixed bulbs that can’t be replaced – meaning the fixtures have to be thrown away. Fixtures such as these account for 100,000 tonnes of electrical waste every year – out of a total 1.5 million tonnes of electrical waste each year. Minister for Climate Change, Lord Martin Callanan, said: Flicking the off-switch on energy inefficient light bulbs is a simple way that households can save money at the same time as saving the planet. Phasing out halogen bulbs in favour of LED alternatives that last longer, are just as bright and cheaper to run, is another way that we are helping tackle climate change. Chief Executive of Signify UK, which owns Philips lighting, Stephen Rouatt, said: We welcome the UK government’s next step in the transition towards more sustainable lighting products. Using energy-efficient LED equivalents for halogen and fluorescent lighting on an even broader scale will significantly help the UK on its journey to decarbonisation, as well as lowering the annual electricity bills for consumers. Overall, the government’s package of energy efficiency improvements will also cut 8 million tonnes of carbon emissions in 2021 by reducing the amount of energy products consume over their life-time – the equivalent of removing all emissions from Birmingham and Leeds each year.
2021 09 27
read more
Bright Idea: New LEDs Can Detect Off Food And Lethal Gases
Bright Idea: New LEDs Can Detect Off Food And Lethal Gases
New LED technology has potential to benefit firefighters, miners, the military, plumbers and households.(Source:University of Melbourne) Your smart device could soon be even smarter with a new infrared light emitting diode (LED) that is ‘tuneable’ to different wavelengths of light – it could enable your fridge to tell you when your food is going off and your phone to tell you if that Gucci purse is real. The technology has been developed by the University of Melbourne, the Lawrence Berkeley National Laboratory, the University of California, Berkeley, and the Australian Research Council Centre of Excellence for Transformative Meta-Optical Systems (TMOS). They have come up with a device that could identify a suite of gases, potentially including lethal ones, improving the safety of firefighters, miners, the military, and your local plumber. The work appeared in the journal, Nature. Infrared (IR) spectrometers are common laboratory equipment that can identify different materials by analysing their infrared signatures, which is invisible to the human eye. Just like an AM radio can be tuned to different frequencies of radio wave, IR spectrometers can be tuned to different wavelengths, giving a broad-spectrum analysis of a gas sample. However, these machines are bulky and expensive and not usually practical to take out of the laboratory and into the field. “Our new technology bonds a thin layer of black phosphorus crystals to a flexible, plastic-like substrate, allowing it to be bent in ways that cause the black phosphorus to emit light of different wavelengths essentially creating a tuneable infrared LED that allows for the detection of multiple materials,” University of Melbourne Professor Kenneth Crozier said. “This technology could fit inside smartphones and become part of everyday use.”For example, the bacteria found in meat release various gases as they multiply. The presence of these gases is a good indication that the meat is spoiling and is no longer fit for consumption.“The device placed inside a fridge could send a notification that meat is going off. When pointed at a handbag, it could reveal whether the bag is made of real leather or a cheaper substitute,” said Professor Crozier, who is also the Deputy Director of TMOS.Current materials that are used for IR photodetectors and light emitting devices can be difficult to manufacture, in large part due to the need for multiple layers of perfectly linked crystals. This new black phosphorus technology requires just one layer allowing the device to be flexible, giving it unique properties when bent.“The shift in black phosphorus' emission wavelength with bending is really quite dramatic, enabling the LED to be tuned across the mid-infrared,” said Professor Ali Javey, from the University of California at Berkeley, whose group led the work.Importantly, the device could make the work of firefighters, miners and military safer, allowing them to identify potentially lethal gases from safe distances as the ultra-thin, ultra-light devices can be placed on small drones. Flying such a drone over a building fire could tell firefighters what dangers they face and equipment they’ll need.The low-cost technology could also make its way into devices for use by plumbers and building managers.“Our IR photo detectors could be integrated into a camera so that we could look at our phone screen and ‘see’ gas leaks or emissions and be able to determine what kind of gas it is,” Professor Crozier said.
2021 09 27
read more
Gallium Oxide White LED Prospects
Gallium Oxide White LED Prospects
Saga University in Japan has reported work towards white light-emitting diodes (WLEDs) based on rare-earth (RE)-doped gallium oxide (Ga2O3) [Yafei Huang et al, Appl. Phys. Lett., v119, p062107, 2021]. The researchers adopted a vertical integration strategy with Ga2O3 layers doped with thulium (Tm), europium (Eu) and erbium (Er) grown on top of each other. The team comments that “films grown by lateral integration are deposited side-by-side, while the co-doping of multiple rare earth elements into the same host will unavoidably degrade the crystal quality and, thus, induce undesirable threshold voltage and luminous efficiency.” The vertical strategy leads to more compact devices without compromising crystal quality. The team adds: “On the other hand, compared with phosphor-assisted WLEDs, direct white light emissions are achieved from single-material-based LEDs in this work without using additional red, blue or green phosphors, which can greatly reduce the energy re-absorption effect between different phosphors.” Such energy re-absorption would naturally impact power efficiency. The researchers also see the phosphor-free approach based on single-material-based WLEDs with direct primary color mixing as more conducive to displays based on smaller-pixel micro-LEDs. Although rare-earth doping has been tried in gallium nitride and zinc oxide devices, there are problems such as needing high voltages (~100V) or poor color balance due to spectral gaps. The Saga team sees β-Ga2O3 as “an ideal host for rare-earth ions benefiting from its ultrawide bandgap (4.9eV), which is advantageous to improve the thermal stability and luminous ability of rare-earth dopants at room temperature”. According to the researchers, at present, “there are no reports available related to full-color (white) LEDs based on rare-earth-doped Ga2O3.” The doped Ga2O3 layers were deposited on p-type gallium arsenide, p-GaAs (111), using alternate-target pulsed laser deposition (PLD) at 500°C. The Ga2O3 targets were variously doped with rare-earth oxides: 1wt.% Tm2O3, 1wt.% Eu2O3 and 5wt.% Er2O3. The laser light came from a krypton fluoride (KrF) excimer laser emitting deep-ultraviolet light at 248nm wavelength. The PLD was carried out in an oxygen atmosphere at 0.1Pa pressure. The samples consisted of 150-periods of the sequence of the three types of Ga2O3 doping (Figure 1). The growth process lasted 150 minutes. Material analysis suggested that the atomic concentrations for the doped layers were 0.3% Tm, 0.5% Eu and 2.3% Er. Figure 1: Schematic structure of LED-A based on Ga2O3:(Tm+Eu+Er)/GaAs heterojunction. The LEDs featured an indium tin oxide (ITO) transparent conductor n-electrode and gold (Au) p-electrode. The ITO was applied with direct-current sputtering; the gold with electon-beam evaporation. Atomic force microscopy showed a sample surface “filled with uniformly distributed grain-like structures” with a root-mean-square roughness of 10nm. When subjected to a forward voltage of more than 8.8V, the current begins to increase rapidly. The researchers also note that the electroluminescence (EL) is only observed under forward bias, suggesting that “simultaneously injected electrons and holes are indispensable for the EL”. The researchers associate the emitted light with 4f transitions from the Eu3+, Er3+, and Tm3+ ions (Figure 2). Figure 2: (a) Current-voltage characteristics curve of LED-A. Inset: semi-log characteristics and digital photograph of LED-A at 70mA. (b) EL spectra under different operating currents. (c) EL intensities of emissions at 475, 529, and 615nm as function of injection current. (d) CIE chromaticity coordinates under different currents.   The various peaks associated with the different ions were: 461 and 475nm with Tm3+; 529, 550, and 656nm with Er3+; 590, 615, and 712nm with Eu3+. Although the emissions somewhat overlap, the Tm ones are mainly in the blue range, Er green, and Eu red. The combination gives white light. The researchers explain: “Due to the existence of oxygen vacancy defects in the film, the simultaneous red, green, and blue emissions are supposed to be triggered by the defect-assisted energy transfer from the Ga2O3 host to RE3+ (Eu3+, Er3+, and Tm3+) ions.” On the basis of previous reports, the researchers expect the emission to be relatively independent of the temperature environment since the complete outer 5s and 5p orbitals shield the 4f shell from such influence. The positions of the peaks were found to vary little with changing current injection. However, the strength of the emissions did vary, with the balance shifting from red to green and blue as the current increases. The color content of the main device reported, LED-A, shifted from pink to white with injections from 40mA to 80mA. The correlated color temperature (CCT) varied from 2370K to 7592K, respectively, a shift from a warm to cold tone. The team reports: “For instance, the emitted light at 55mA locates at a warm-white point with CIE coordinates of (0.3739, 0.3410) and CCT of 3926K, which meets the requirements for indoor lighting applications.” The researchers also see 65mA as providing “superior” CIE coordinates, (0.3329, 0.3335), but 5479K CCT, suitable for indoor/outdoor cold-white illumination. Table 1: Thicknesses of doped Ga2O3 layers. The color balance was also varied in hardware, with the researchers producing four other device structures with different layer thicknesses of the various components (Table 1). These resulted in different color balance behavior (Figure 3). Figure 3: CIE chromaticity diagrams for (a) LED-a, (b) LED-b, (c) LED-c, and (d) LED-d under different operating currents.     The author Mike Cooke is a freelance technology journalist who has worked in the semiconductor and advanced technology sectors since 1997.  
2021 09 27
read more
Retailers Employing NICHIA LED Technology Are Ahead Of The Game
Retailers Employing NICHIA LED Technology Are Ahead Of The Game
After completing a successful pilot project, German retailer EDEKA equips its latest store entirely with NICHIA technology Tokushima, Japan – 3 August 2021: LED manufacturer NICHIA is a technology leader in highly efficient human centric lighting and the replication of natural light. Its innovative LED technologies are increasingly being used in retail to push the shopping experience to the next level. The most recent project is an EDEKA store in Wiesbaden-Sonnenberg, Germany, which opened its doors in May and is equipped with a lighting solution entirely based on NICHIA technology. The owners of the store engaged Prof. Dipl.-Phys. Werner Lorke and his interdisciplinary team of experts to plan and implement the project. As part of his consulting work with iO Interdisziplinäre Objekte, the physicist focuses on product and exhibition design and brings together the fields of architecture, technology, and art. He was tasked with developing and employing a lighting concept that presents the store’s merchandise in the best possible way and creates a positive shopping experience for the customer. To do this, he selected NICHIA's ‘Light so Good' technologies, which significantly enhance the quality of light: 2-in-1 tunable white, Optisolis, and Vitasolis.For the Wiesbaden-Sonnenberg project, Lorke drew, among other things, on the experience he had already gained over several years with another EDEKA branch in Wiesbaden. Above average sales figures in this store prove that the influence of light on people is enormous. Thus, lighting generally represents a great opportunity for retailers. "We are proud to say that all our activities here, in terms of introducing new illumination, have more than paid for themselves within a few months," he emphasizes. "Based on this experience, our advice to retailers, in general, is to look at lighting as a sales tool rather than as an expense."In the confectionery department, for example, a solution with adjustable color temperature has proven successful. Thanks to 2-in-1 tunable white LED and COB, it is possible to create good contrast between the merchandise on display and the aisles, as well as to install dynamic lighting in which the color temperature changes throughout the day. Optisolis products are ideal for illuminating goods such as fruit and vegetables. They can be used to produce a light spectrum that comes closest to that of the sun, while at the same time UV emission is essentially non-existent. As a result, it has a positive effect on perishable goods while fruit and vegetables shine in the best possible light. Vitasolis provides brilliant white light and a wide wavelength spectrum for pleasant illumination. A strong cyan component compared to other products has a positive effect on the human circadian rhythm. Aisles illuminated with Vitasolis in combination with Optisolis product provide shoppers with an image that is inspiring and very pleasant – a solution ideally suited, for example, in the dairy section. High CRI Optisolis illuminating the dairy products presents the merchandise more naturally while the natural white light coming from Vitasolis is suitable for illuminating the aisle. Lorke applies Vitasolis for two reasons: one, it allows for a good contrast between space and merchandise thanks to its broad spectrum and low contents of yellow spectrum. Two, its quality of light is extremely easy on the eye. As such, the technology also perfectly meets the needs of any counter areas. Here, the comfortable lighting makes waiting times more pleasant for visitors. A total of around 500 luminaires from all three 'Light so Good' technologies have been installed at EDEKA in Wiesbaden-Sonnenberg."Ultimately, each product group in the store requires its own lighting concept," states Lorke. "The secret lies in the optimal mix of color temperature, color spectrum, and contrast. At the moment, I don't see any alternative on the market to NICHIA products for achieving such a high quality of light as we have managed to create here."Note: Vitasolis and Optisolis are trademarks owned by NICHIA.
2021 09 27
read more
Scientists Develop Efficient GaN-based Green LEDs
Scientists Develop Efficient GaN-based Green LEDs
A research team led by Shengjun Zhou at Wuhan University has reported developing efficient GaN-based green LEDs on sapphire substrate. They proposed a hybrid nucleation layer consisting of sputtered AlN and mid-temperature GaN components to boost quantum efficiency of GaN-based green LEDs.The team says the hybrid nucleation layer provides a promising approach for the pursuit of efficient III-nitride emitters in the green-to-amber region.Currently, the development of efficient III-nitride emitters in the full visible range is very attractive. The integration of multicolour III-nitride emitters can enable efficient and precise management of the mixing spectra to realize high-resolution displays and various smart lighting applications. However, owing to the poor efficiency of III-nitride emitters in the green-to-amber region, these promising applications have been largely delayed.The researchers have fabricated high-efficiency InGaN/GaN green LEDs on sapphire substrate by using the novel hybrid nucleation layer. A stacking fault band structure was generated at the interface of hybrid nucleation layer and GaN, which facilitated the misfit stress compensation. Benefiting from the early misfit stress relaxation, they achieved reduced dislocation density and residual stress in the green LEDs. An efficiency improvement of ~16 percent was demonstrated in the mass production by using the hybrid nucleation layer. This gain is attributed to the increased localisation depth and spatial overlapping of the electron and hole wave functions.‘Toward efficient long-wavelength III-nitride emitters using a hybrid nucleation layer' by Bin Tang et al, Optics Express, 29(17), 2021 WHU team boost quantum efficiency using hybrid nucleation layer
2021 09 27
read more
Candidates For Next-gen LED-based Datacoms
Candidates For Next-gen LED-based Datacoms
UK researchers show how organic semiconductors, CQDs and perovskites can be used in LED-based optical communications systems A new paper from the University of Surrey and the University of Cambridge has detailed how two relatively unexplored semiconducting materials can satisfy the telecommunication industry's hunger for enormous amounts of data at ever-greater speeds.LED-based communications techniques allow computing devices, including mobile phones, to communicate with one another by using infrared light. However, LED techniques are underused because in its current state LED transmits data at far slower speeds than other wireless technologies such as light-fidelity (Li-Fi).In a paper published by Nature Electronics, the researchers from Surrey and Cambridge, along with partners from the University of Electronic Science and Technology of China, examine how organic semiconductors, colloidal quantum dots (CQDs) and metal halide perovskites (perovskites), can be used in LED-based optical communications systems.The research team explored efforts to improve the performance and efficiency of these LEDs, and they considered their potential applications in on-chip interconnects and Li-Fi.Aobo Ren, the co-first author and visiting postdoctoral researcher at the University of Surrey, said:“There's excitement surrounding CQDs and perovskites because they offer great promise for low-power, cost-effective and scalable communications modules.“Although the conventional inorganic thin-film technologies are likely to continue to play a dominant role in optical communications, we believe that LEDs based on these materials can play a complementary role that could have a sizeable impact on the industry.”Hao Wang, the co-first author and PhD student at the University of Cambridge, said: “Future applications of LEDs will not be limited to the fields of lighting and displays. The development of LEDs based on these solution-processable materials for optical communication purposes has only begun, and their performance is still far from what's required. It is necessary and timely to discuss the potential strategies and present technical challenges for the deployment of real-world communication links using these LEDs from the material, device and system aspects.”Jiang Wu, the corresponding author from the University of Electronic Science and Technology of China, said: “Photonic devices for the Internet of Things (IoT) and 6G communication systems need to be high-speed, low-cost and easy to integrate. Organic semiconductors, CQDs and perovskites are promising materials that could be used to complement and/or compete with conventional inorganic counterparts in particular optoelectronic applications.”Wei Zhang, the corresponding author and Senior Lecturer from the University of Surrey, said: “IoT and 6G communication systems represent a trillion-dollar market in the next few years. We are proud to collaborate with the top research teams in this field and accelerate the development of emerging data communication technology for rapid entry to the market in the next decade.”'Emerging light-emitting diodes for next-generation data communications' by Aobo Ren et al; Nature Electronics 2021
2021 09 27
read more
Seoul Semiconductor 's Innovative WICOP LED Technology
Seoul Semiconductor 's Innovative WICOP LED Technology
Seoul Semiconductor Seeks Greater Market Share in Global High-Power LED Market Valued at USD 2 Billion with Innovative WICOP LED Technology. ANSAN, South Korea--Seoul Semiconductor Co., Ltd. (KOSDAQ 046890), a leading global innovator of LED products and technology, announced that it has introduced high-power LED package ‘Z5M4’ with WICOP technology, one of the second-generation technologies in the LED industry. Z5M4 is 10% brighter than the conventional products and is easy to replace the existing high-power products. Accordingly, Seoul Semiconductor seeks to expand its market share in the USD 2 billion worth of global high-power LED market for street lighting, bay-lighting, and horticulture lighting, which has been formed by vertical chip manufacturers.   Comparison of WICOP and product design stolen under the name of COB or CSP * Vertical chip: Excellent heat dissipation structure with vertical electrodes design * COB (Chip on Board): A structure that reduces the volume by connecting wires to a semiconductor chip directly mounted on a printed circuit board * CSP (Chip Scale Package): Silicon semiconductor technology that makes BGA (Ball Grid Array) on silicon semiconductor chips and assembles them in a clean room Z5M4 LED with WICOP technology is designed to be 1:1 compatible easily with existing high-power products, and its excellent heat dissipation structure makes it a high-power LED package suitable for high-brightness and high-efficiency. It offers an industry-leading high luminous efficiency of 175 lm/W and can be used for up to 100,000 hours. Seoul Semiconductor has been leading the global market with its core patented technology, which obtained a permanent injunction against Philips TV product and 13 automotive lighting brand LED products infringing WICOP patents in 2019 and 2021.“Seoul Semiconductor’s Z5M4 LED for high-power lighting will quickly encroach the USD 2 billion market dominated by vertical technology companies. We plan to apply this product not only to the high-power lightings, but also to the  electronic device flash and automotive lightings, followed by SunLike LED, a natural sunlight spectrum LED technology,” said an official of Seoul Semiconductor. Seoul Semiconductor’s Z5M4 package with WICOP technology About Seoul Semiconductor Seoul Semiconductor is the world’s second-largest global LED manufacturer, a ranking excluding the captive market, and has more than 10,000 patents. Based on a differentiated product portfolio, Seoul offers a wide range of technologies, and mass produces innovative LED products for indoor and outdoor lighting, automotive, IT products, such as mobile phones, computer displays, and other applications, as well as the UV area. The company’s world’s first development and mass production products are becoming the LED industry standard and leading the global market with a package-free LED, WICOP; a high-voltage AC-driven LED, Acrich; an LED with 10X the output of a conventional LED, nPola; a cutting edge ultraviolet clean technology LED, Violeds; an all direction light emitting technology, filament LED; a natural sun spectrum LED, SunLike; and more.
2021 09 27
read more
Question with LED and Zener Diode?
Question with LED and Zener Diode?
Get a zener diode 3.5 volts higher than the one you now have1. LED Gloving Slow Shutter Speed?This is an example of rear curtain sync. Set camera to rear curtain sync Camera on tripod Low ISO Small aperture Dark conditions, the only light you want to record is the light from the gloves and the final flash. Flash mounted on camera Shutter on 'B' setting Remoter shutter release. Method. Open shutter and lock open. Move the gloves around. Close shutter. Just before the shutter closes the flash will fire, recording the face etc. Rear curtain is good because the light trails are behind the movement which is opposite to the normal flash sync. Chris2. Will the Germany led European Union be a Fourth Reich?Is EU under German domination becoming a 4 rth Reich?A supranational union is a type of multinational political union where negotiated power is delegated to an authority by governments of member states. The concept of supranational union is sometimes used to describe the European Union (EU), as a new type of political entity. (wikipedia).Germany currently is maintaining a balance of trust and power, and has no interest to get more power at the expense of trust. And of course we have interests, economical interest3. What is the brightest LED lantern?Brightest Led Lantern4. Powering an LED with transistor in saturation mode"Please do not tell me to buy other transistors" ...that's what I wanted to suggest: Use a MOSFET instead of a NPN, rated at 150 mA (or more). The gate/base of a MOSFET draws less (usualy much less) than 1 mA. Otherwise the darlington pair is another solution if for some valid reason you have to keep these specific transistors. Your calculation about R2 is correct5. what kind of LED bulb do i need for these tail lights?do no longer forget water. I particularly have 13 geckos. My abode geckos drink water i've got sprayed into the tank off the glass and flowers and my leopard geckos drink water from a bowl. My geckos purely consume crickets and different small bugs. considering they only consume at night I feed them at night. attempt conserving slightly carrot or a wedge of an orange interior the tank for any crickets that are not getting eaten perfect away so the crickets do no longer nibble on the geckos. additionally, an undertank heater on one section is significant. reptiles choose their tanks to have a heat section and a cooler section. they choose a mild on one portion of the tank additionally. Blacklights paintings nicely for my nocturnal reptiles6. the beatles vs. led zeppelin????john lennon jimmy page paul mccartney (unless we are going on bass skills alone) john bonham sgt peppers led zeppelin 2 the white album rubber soul led zeppelin a day in the life kashmir whole lotta love helter skelter black bird over the hills and far away well, after splitting the answers almost exactly 50-50 i am just as undecided as when i started. i like both for mostly different reasons.7. How to toggle LED on button press?At the moment, you've got two main problems. Firstly, both your if statements are being triggered one after the other. This is because the first if statement sets x to 0, which is part of the condition the second if statement looks for. The second problem is that you are not monitoring the previous state of the button. buttonState will appear HIGH every time round loop, even if the button has been held down for several seconds. The result is that the output pin will be quickly getting turned on and off all the time. What you need to do is store the last known state of the button. On every iteration of the main loop, only respond to the button if it's currently HIGH, and if it was LOW last time round the loop. You also need to make sure your two if statements are mutually exclusive; i. e. if you trigger one then do not trigger the other by mistake too, or it will cancel it out.Something like this should work better:As noted elsewhere, you still need to debounce the button, otherwise you are likely to get some false-positives. That can be done in hardware or software. A really simple way to get around it temporarily is to put in a delay of several milliseconds every time you detect the button changing state. It's not perfect, but it might be enough to get you started
2021 08 24
read more
no data
Green Earth is continuously approaching different markets in various ways, we will keep on researching and designing innovative products, bring a better light to human beings. 
no data
QUICK LINK
CONTACT US

Market cooperation : Pei Yin

E-mail : yinpei@green-earth.cn

Phone : +86 13823531612

Supplier Cooperation : Zhi Song

E-mail : songzhi@green-earth.cn

Phone : +86 13588306599

ADDRESS
5-7F, Block 1, Industrial Park 29, Makan Village, Xili Town, Nanshan District, Shenzhen,China. 518055

Copyright © 2021 GREENEARTH  |  Sitemap

chat online
Please message us and we’ll be sure to respond ASAP, what product you intrested in?