Green Earth has become a more professional and full-fledged company since a decade development.

greenearthcn@greenearthcn.com   +86 13823531612       

How Much Is 15 Meters High Pole Lights?

  Author :Green earth– LED Strip Lights manufacturers

The 15-meter high pole light belongs to a high-rantric price, a standard of practicality, and the high pole light sales in the entire lighting market, the height of the high pole lamp of about 15 meters has accounted for a year. 70% of the other models, 15 m high rod lights, the special value, can be seen.

The 15-meter high can meet the nightlighting needs of most squares, in the highway round island, 15 meters high can just avoid the ten thousand roller high-voltage lines, without the need for too much power source, can also give driver friends They bring a clearer illumination brightness. In terms of cost performance, 15 meters should be much cheaper. First let's see the diameter and wall thickness, the lower conventional diameter of the 15 m high rod light is about 500mm, the wall thickness is usually around 8mm, followed by the light source, the ideal lighting power of the 15-meter high pole light is 6400W, which is quite At 16 400 W high pressure sodium lamps or metal halogenation lamps. The basic pit length of 15 meters high rod lamp is 2m * 2m * 2m, and 8-party concrete is needed.

The high pole lamp is beautiful, with strong decorative. The lamp lever is a prismatic plug-in steel rod that is molded in high quality Q235 or 65MN steel sheet, which is protected by hot-dip galvanized anti-corrosion treatment. The lamp skeleton is made of high-quality steel, and the aluminum plate is used at the sealing plate. Fastener bolts, nuts are stainless steel. Electrical box protection rating IP23 lamp protection level IP54. High pressure sodium lamps or metal halide lamps are disposed to be inserted, and the trigger is installed in the lamp. Use a dedicated wrench to open the electrical door with a dedicated wrench when replacing or repairing the light source and other appliances. The control box is disposed below the lower part of the light bar or within the light pole. The lighting area is large, the lighting effect is good, the light source is concentrated, the light is uniform, the glare is small, easy to control, maintenance. The electric lifting system is convenient, and after the lamp is raised to the working position, it can automatically take off, hook and wire rope to the high pole lamp. Lighting control is divided into hand control, optical control, time control, and microcomputer control. Suitable for highways, overpass, parking, stadium, vendum, school, airport, and citizen leisure squares.

How Much Is 15 Meters High Pole Lights? 1

GET IN TOUCH WITH Us
no data
recommended articles
News Application
About [LED Tube] Meet Common Problems, LED Flood Lights, LED Industrial Mine Lamps, LED Tubes
About [LED Tube] Meet Common Problems, LED Flood Lights, LED Industrial Mine Lamps, LED Tubes
  Author :Green earth– LED Strip Lights manufacturersAs far as the LED tube we have seen, there is a structural, internal wiring, anti-electric shock protection, insulation resistance, and electrical strength, creepage distance and electrical gap, heat resistance and refractory. Different LED tubes are different from the light source and materials that determine different price and safety, and the LED tube has a built-in power supply, and the agency different decisions is different.Century Ruiguang Company Engineering Department Li Manager's current technical security issues related to LED tubes, for the type II anti-electric shock type, requires LED tube input contact to reinforce insulation resistance and electrical strength, many built-in power transformers and LED module aluminum substrate Improper installation, causing the test to pass. Or many companies use non-separated power supplies in order to save costs and power efficiency. Internal wiring is mainly linear and insulating thickness, mechanical damage, and insulating layer. The inside is basically can't be in contact with the lamp shell of the aluminum, and the insulation is enhanced. It is also necessary to avoid internal wires and power supply directly to contact the outer casing and prevent the wire from being broken. In terms of structure, it is necessary to prevent insulation of the lamp head, screw, and contact metal surface, and the corresponding lamp head plastic should be used to prevent melting. Since the screws of the LED tube are directly locked, they are required to pay attention to the creepage distance and electrical interval. The internal power supply and the aluminum housing are needed to be separated from the insulating sleeve to reach the power level. The lamp holder and the lamp body are relatively insulated to prevent leakage of the shell.Article Source: LED tube
About [LED Tube] Industry Case, LED Industrial Mine Lamp, LED Tube, LED Spotlight
About [LED Tube] Industry Case, LED Industrial Mine Lamp, LED Tube, LED Spotlight
  Author :Green earth– LED Strip Lights manufacturersIn 2014, the LED lighting industry was not destined to be an ordinary year. Thunder X illuminated, followed by Wuhan, Hubei, after Hangzhou, Zhejiang, once again“replace”Guangdong Shenzhen operations middle candidates; Yigong and Wu Zhengzheng broke up and the goods were 120 billion to buy, the original agent will be in the question, leaving a lot of topics worthy of the illumination. BeTwenty years ago, Guangzhou, there is a group of fresh young people, we all have simple wishes, this wish is just a little bit better for the days. They stepped on classic“Phoenix”Double bar bike, the street alley is delivered by a hardware store. They grow in plain, change in growth, very fast,“After the Yangtze River”, A batch of storm-free pre-sealing, the state-owned bulb manufacturing plant falls, another batch“Unique”The private lighting company founded it, which also laid a lot of a lot of a lot of lines.Replacement brands frequently in the short term, the loss of the dealer cannot be estimated. Huizhou's potential brand West X original Nanjing agent, from the west x brand I can't promote the promotion fees, I have to light your career with him.“Puff”Break up, turn the flower light.In the transformation of China's economy, our employment is increasing, and the warehousing capital is increasing, and the delivery capital is increasing, and the manufacturer is looking for a variety of increases, and the quotation is getting more flat. Many dealers are carrying a micro profession. Selling, and even no profit sale, and even some are still being sold.Article Source: LED tube
Eight-meter Solar LED Stream Pole Strength Calculation
Eight-meter Solar LED Stream Pole Strength Calculation
  Author :Green earth– LED Strip Lights manufacturersEight-meter solar LED stream pole strength calculationThe following explanation is determined according to GB50135-2006 "Tower Structural Design Specification". Known Conditions are calculated in maximum wind speed V = 36m / s, 12 typhoon. Solar LED Street Light Bar Material Q235 Wait Stress [σ] = 225000kn / m2.Solar LED street lamp lever shape size 8m, light pole height h = 8m, wall thicknessδ5, upper mouth diameter D = 60, lower mouth diameter D = 165 . The upper part of the light pole is in the upper arm length size is l = 1.3M lamp bottom plate flange 420 ×420 .Solar LED street lamp foundation size, foundation profile 0.6m×0.6m, buried depth 1.5m, ground bolt hole distance 320 ×320 , the bolt diameter M24 is four.Solar LED street light pole strength calculation: standard wind pressure calculation, basic wind pressure is W0 = 0.8kN / m2 by wind speed 36m / s, the standard wind pressure W = W0·KT = 0.8×1.1 = 0.88kn / m2. The wind pressure adjustment coefficient KT takes 1.1.The wind calculation of the solar LED street lamp holder stroke light headμS, conical rod body 8.7 wind pressure high speed change coefficientμZ, take 0.9, the light pole is in the wind area S rod = 1.06m2, the street lamp is in the wind area S light = 0.3m2, the light rod is affected by the wind F rod = W·μYes·μexist·S rod = 0.588KN, the lamp head is affected by wind F light = W·μYes·μexist·S light = 0.166knThe total bending moment of the solar LED street lamp lever is calculated, the light pole bending moment M rod = f·H / 2 = 1.176KN·m, the lamp head to the bending moment of the pole, M light = F light·H = 1.328KN·M total bending moment,σM = M rod M lamp = 2.504 kN·NoSolar LED street light pole bending modulus calculation. WZ =πD 4—D4 / d = 3.14×(0.1654-0.1554) / 32/0.165=0.0000976m3.Calculation of solar LED street light pole bending stress. Bending stressσσ=σM / W0 = 25661.8kn / m2σσAs seen from the above calculations, the strength of the solar LED street light pole is sufficient. The geodial bolt intensity check, the wind direction is the diagonal, the tension of the terrain bolt is the maximum N =σM×Y /σY²= 2.504×0.327 / 0.327²2×0.1²= 6045KN, safety factor k take 2.5 floor bolts M24 effective cross-sectional area, s = 314 ², Q235 steel yield limit,σS = 235n / ², Licensed pull N =σYes×S / K = 235×314 / 2.5 = 295KN> n = 645KN, and the ternary bolts are more than four M24.YWX [Excellent Promotion Screen 18013196696]
no data
Green Earth is continuously approaching different markets in various ways, we will keep on researching and designing innovative products, bring a better light to human beings. 
QUICK LINK
CONTACT US

Market cooperation : Pei Yin

E-mail : greenearthcn@greenearthcn.com

Phone : +86 13823531612

Supplier Cooperation : Zhi Song

E-mail : songzhi@green-earth.cn

Phone : +86 13588306599

ADDRESS
5-7F, Block 1, Industrial Park 29, Makan Village, Xili Town, Nanshan District, Shenzhen,China. 518055
FOLLOW US
   

Copyright © 2021 GREENEARTH  |  Sitemap

chat online
Please message us and we’ll be sure to respond ASAP, what product you intrested in?