Green Earth has become a more professional and full-fledged company since a decade development.   +86 13823531612       

LED Street Lamp Manufacturers: How to Implement the Basis of High Pole Lights

  Author :Green earth– LED Strip Lights manufacturers

The high pole light belongs to one of the lamp types in the street lamp. It is called a high pole lamp because it is usually 15 meters above 15 meters, which is much higher than other conventional street lights, and a height of more than 20 meters. A steel sheet having a wall thickness of 5.6 mm is usually used for the main material. After the rod is rolled, the welding is performed, the welding portion is not assessed by the strongness of the whole plate, and the overall welding of the high rod light is required to be on the inside and outside surface. The hot-dip galvanized treatment can ensure that the main rod will not rust within 15 years. Of course, the galvanized process will not achieve this effect, but after all, the steel wall thickness is 5mm or more, even if rust It is not rustful for ten years for twenty years, so the main pole of the high pole light is bad at all, unless intended to change it.. The lifting system is a core part of the high pole light. The lifting operation of the lamp is completely dependent on the lifting system. The lifting system of the high pole light is mainly a hoisting machine and wire rope. It can be said that if the wire rope is not bad, the hoist is not bad for decades. Why do you say that, first, this set of equipment is installed inside the main rod. The wind blows rain can never cause the line aging. Secondary hoisting machines are rarely started. If the light source is not bad for 10 years, then Don't move it ten years. So I want to make the lifting system is very difficult.. The role of the high pole lamp light is to load the light source. The type of shape is very diversified, but the change is not from the Zone, and more looks also through the bending welding, the firmness is indestructible, and ten two two Ten 400 watts of high pressure sodium lights are most important to Damara trolley. Whether it is an LED lamp or a high pressure sodium lamp, they all belong to the electronic type of products. Electronic products are only known to any foreign pedestrians, but I don't know how it happened, the quality of this thing is not seen at all.. The light source is the main symbol of the complete set of high pole lights. Because the high pole light is a street lamp, the street lamp is illuminated, and the light source is broken is equal to the high pole light, so the choice of light source quality is especially important.

The characteristics of the high pole lights mainly highlight high, people often stand upright, this is also in the high pole lights, but only need to make this sentence a small revision, both long high The photo is far. High, is a big point of the high pole light, and it is more appropriate to say that there is no advantage, because the height advantage can make the top light source irradiation area to the extreme, thereby achieving an ideal lighting effect.

For large semi-hanging transport vehicles, the shortest high pole lamp is also long because the length of the semi-hanging is only 13 meters, and the shortest high pole lamp will also explore more than 2 meters. This is absolutely not allowed. Taking into account many inconvenient factors such as production, transportation and installation, the production of high pole lights is finally determined as multi-segment assembly form, which is convenient for transportation, but also conducive to production, it can be described as an arrow double carving. It is very reasonable from the surface to see this method, but it is not in the actual installation ... Read the original text

LED Street Lamp Manufacturers: How to Implement the Basis of High Pole Lights 1

recommended articles
News Application
About [LED Tube] Meet Common Problems, LED Flood Lights, LED Industrial Mine Lamps, LED Tubes
About [LED Tube] Meet Common Problems, LED Flood Lights, LED Industrial Mine Lamps, LED Tubes
  Author :Green earth– LED Strip Lights manufacturersAs far as the LED tube we have seen, there is a structural, internal wiring, anti-electric shock protection, insulation resistance, and electrical strength, creepage distance and electrical gap, heat resistance and refractory. Different LED tubes are different from the light source and materials that determine different price and safety, and the LED tube has a built-in power supply, and the agency different decisions is different.Century Ruiguang Company Engineering Department Li Manager's current technical security issues related to LED tubes, for the type II anti-electric shock type, requires LED tube input contact to reinforce insulation resistance and electrical strength, many built-in power transformers and LED module aluminum substrate Improper installation, causing the test to pass. Or many companies use non-separated power supplies in order to save costs and power efficiency. Internal wiring is mainly linear and insulating thickness, mechanical damage, and insulating layer. The inside is basically can't be in contact with the lamp shell of the aluminum, and the insulation is enhanced. It is also necessary to avoid internal wires and power supply directly to contact the outer casing and prevent the wire from being broken. In terms of structure, it is necessary to prevent insulation of the lamp head, screw, and contact metal surface, and the corresponding lamp head plastic should be used to prevent melting. Since the screws of the LED tube are directly locked, they are required to pay attention to the creepage distance and electrical interval. The internal power supply and the aluminum housing are needed to be separated from the insulating sleeve to reach the power level. The lamp holder and the lamp body are relatively insulated to prevent leakage of the shell.Article Source: LED tube
About [LED Tube] Industry Case, LED Industrial Mine Lamp, LED Tube, LED Spotlight
About [LED Tube] Industry Case, LED Industrial Mine Lamp, LED Tube, LED Spotlight
  Author :Green earth– LED Strip Lights manufacturersIn 2014, the LED lighting industry was not destined to be an ordinary year. Thunder X illuminated, followed by Wuhan, Hubei, after Hangzhou, Zhejiang, once again“replace”Guangdong Shenzhen operations middle candidates; Yigong and Wu Zhengzheng broke up and the goods were 120 billion to buy, the original agent will be in the question, leaving a lot of topics worthy of the illumination. BeTwenty years ago, Guangzhou, there is a group of fresh young people, we all have simple wishes, this wish is just a little bit better for the days. They stepped on classic“Phoenix”Double bar bike, the street alley is delivered by a hardware store. They grow in plain, change in growth, very fast,“After the Yangtze River”, A batch of storm-free pre-sealing, the state-owned bulb manufacturing plant falls, another batch“Unique”The private lighting company founded it, which also laid a lot of a lot of a lot of lines.Replacement brands frequently in the short term, the loss of the dealer cannot be estimated. Huizhou's potential brand West X original Nanjing agent, from the west x brand I can't promote the promotion fees, I have to light your career with him.“Puff”Break up, turn the flower light.In the transformation of China's economy, our employment is increasing, and the warehousing capital is increasing, and the delivery capital is increasing, and the manufacturer is looking for a variety of increases, and the quotation is getting more flat. Many dealers are carrying a micro profession. Selling, and even no profit sale, and even some are still being sold.Article Source: LED tube
Eight-meter Solar LED Stream Pole Strength Calculation
Eight-meter Solar LED Stream Pole Strength Calculation
  Author :Green earth– LED Strip Lights manufacturersEight-meter solar LED stream pole strength calculationThe following explanation is determined according to GB50135-2006 "Tower Structural Design Specification". Known Conditions are calculated in maximum wind speed V = 36m / s, 12 typhoon. Solar LED Street Light Bar Material Q235 Wait Stress [σ] = 225000kn / m2.Solar LED street lamp lever shape size 8m, light pole height h = 8m, wall thicknessδ5, upper mouth diameter D = 60, lower mouth diameter D = 165 . The upper part of the light pole is in the upper arm length size is l = 1.3M lamp bottom plate flange 420 ×420 .Solar LED street lamp foundation size, foundation profile 0.6m×0.6m, buried depth 1.5m, ground bolt hole distance 320 ×320 , the bolt diameter M24 is four.Solar LED street light pole strength calculation: standard wind pressure calculation, basic wind pressure is W0 = 0.8kN / m2 by wind speed 36m / s, the standard wind pressure W = W0·KT = 0.8×1.1 = 0.88kn / m2. The wind pressure adjustment coefficient KT takes 1.1.The wind calculation of the solar LED street lamp holder stroke light headμS, conical rod body 8.7 wind pressure high speed change coefficientμZ, take 0.9, the light pole is in the wind area S rod = 1.06m2, the street lamp is in the wind area S light = 0.3m2, the light rod is affected by the wind F rod = W·μYes·μexist·S rod = 0.588KN, the lamp head is affected by wind F light = W·μYes·μexist·S light = 0.166knThe total bending moment of the solar LED street lamp lever is calculated, the light pole bending moment M rod = f·H / 2 = 1.176KN·m, the lamp head to the bending moment of the pole, M light = F light·H = 1.328KN·M total bending moment,σM = M rod M lamp = 2.504 kN·NoSolar LED street light pole bending modulus calculation. WZ =πD 4—D4 / d = 3.14×(0.1654-0.1554) / 32/0.165=0.0000976m3.Calculation of solar LED street light pole bending stress. Bending stressσσ=σM / W0 = 25661.8kn / m2σσAs seen from the above calculations, the strength of the solar LED street light pole is sufficient. The geodial bolt intensity check, the wind direction is the diagonal, the tension of the terrain bolt is the maximum N =σM×Y /σY²= 2.504×0.327 / 0.327²2×0.1²= 6045KN, safety factor k take 2.5 floor bolts M24 effective cross-sectional area, s = 314 ², Q235 steel yield limit,σS = 235n / ², Licensed pull N =σYes×S / K = 235×314 / 2.5 = 295KN> n = 645KN, and the ternary bolts are more than four M24.YWX [Excellent Promotion Screen 18013196696]
no data
Green Earth is continuously approaching different markets in various ways, we will keep on researching and designing innovative products, bring a better light to human beings. 

Market cooperation : Pei Yin

E-mail :

Phone : +86 13823531612

Supplier Cooperation : Zhi Song

E-mail :

Phone : +86 13588306599

5-7F, Block 1, Industrial Park 29, Makan Village, Xili Town, Nanshan District, Shenzhen,China. 518055

Copyright © 2021 GREENEARTH  |  Sitemap

chat online
Please message us and we’ll be sure to respond ASAP, what product you intrested in?