Use the LED Explosion-proof Industrial Mine Lamp, Safe "equipment" to Take the Town

Environment and lighting requires the installation of the LED explosion-proof mine lamp, and is ready to prepare the three-core cable of the corresponding length according to the distance of the lamp to 220V power supply. The 2 meter three-core cable equipped with the lamp passes through the steel pipe and fixes the lamp. Open the upper cover of the ballast box, the compression nut introduced by the cable of the cable, and the introduction of the lamp cable, introduced the power cable, and introduce the pressing nut into the ballast box.

The LED explosion-proof worker is connected to the wiring diagram in the box, and the luminaire and the power supply are introduced into the cable, close the cover, and tighten the screws. The other end of the ballast box input cable is then turned on to the 220V power supply to turn on the 220V power supply. When replacing the lamp, simply rotate the lamp housing smoothly, you can separate the lamp housing with the upper cover, remove the lamp, replace the new light bulb, and install the luminaire in the opposite direction.

Xiaobian reminds everyone: When the LED explosion-proof worker is used, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the center temperature of the transparent parts is more than touch. When replacing the bulb, the same model should be used; if the bulb model or power is changed, the ballast should be replaced accordingly. The cable is required to replace the cable by 2 meters from the lamp to the ballast.

Keywords: LED explosion-proof industry